Misc Collectibles

Some people call it Unlucky #13 but to others it's lucky. Now wear the number that most people fear on your sleeve or bag with this embroidered iron-on patch.

• Size Approx: 2" W

Inspired by everything going on during 2020 these infected buttons tell everyone to back away, stay 6' away and remind you to not touch your face. The perfect piece to add to any horror fans collections that you know loves the world of creepy and freaky.

• Includes (4) 1.25" buttons
  
• Made in the USA (using all USA made materials)

What better Classic Monster product than your very own Creature From the Black Lagoon Enamel Pin!

This beautiful full color 1.75" tall soft enamel pin, comes with double back clutches and is perfect to put on a shirt, jacket or backpack.

• Officially Licensed 
• Collectible Pin Back Card 

The Universal Monsters are trademarks and copyrights of Universal Studios. Licensed by Universal Studios. All Rights Reserved.

Brand new series of Universal Monsters pins featuring Wolfman is  1.75" tall soft enamel pin, comes with a double rubber clutch backing and is perfect to put on a shirt, jacket or backpack. 

• Officially Licensed 
• Collectible Pin Back Card 

TM & © Chaney Entertainment. All Rights Reserved / The Universal Monsters are trademarks and copyrights of Universal Studios. Licensed by Universal Studios. All Rights Reserved.

What better way to compliment your Scary Halloween Product than with your very own Unmasked Sam Fear Air Freshener!

• Officially Licensed 
• Cinnamon Scented 

© Legendary

Trick or Treat Studios and Universal Studios are proud to present the officially licensed Halloween II Poster Pumpkin Magnet.

Sculpted by Alex Rey, every detail of Pumpkin from the Halloween II is represented in this highly detailed magnet.

• Officially Licensed
• Poly Resin and Hand Painted.
  
• Collectors Box
  
• Roughly 3.5"

Halloween II is a trademark and copyright of Universal Studios. Licensed by Universal Studios LLC. All rights reserved.

The New York ECTO-1 License Plate is produced as seen on the '59 Cadillac Hearse in the 1984 movie Ghostbusters.  This plate has only two holes at the bottom, just as it was in the movie.  This demonstrates the high level of detail we strive for with each of our screen accurate plates.

• Standard USA plate dimensions (12" x 6")
• Screen accurate plate / exact replica
• Metal stamped / embossed aluminum
• Shrink-wrapped

Expand your Pop! style with Pop! Pins! This large Pop! Pin measures approximately 4-inches tall, just like the Pop! Vinyl Figure it's based on. Not only does the pin have the standard pin backings so you can attach it to bags or a cork board; it also has a "Funko Crown" pin stand allowing it to stand up for a dynamic display! True to it's namesake, the head is raised making it pop from the body. This Universal Monsters Bride of Frankenstein Large Enamel Pop! Pin comes packaged in a window display box. 

• Officially Licensed
• 4" Tall
• Crown Stand

Trick or Treat Studios and Studios Canal are proud to present the officially licensed Evil Dead 2 - Evil Ash Magnet.

Sculpted by Makov Viktor Sergeevich, every detail of Evil Ash from the Evil Dead 2 is represented in this highly detailed magnet.

• Officially Licensed
• Poly Resin and Hand Painted.
  
• Collectors Box
  
• Roughly 4"

This amazing collection of wall decor comes with three static wall decor designs and one large posable wall decor.

Each piece in this amazing collection of wall decor was designed by Marty McEwen and was drawn in a vintage Halloween Wall Decor style, similar to the classic Halloween Wall Decor from the early 60's. All our Wall Decor is printed on thick 300gsm coated paper, perfect to reuse for many Halloween Parties to come.

• Officially Licensed 
• Series 1

The Texas Chainsaw Massacre © 1974 Vortex, Inc./Kim Henkel/Tobe Hooper All rights reserved.

The Kansas KAZ 2Y5 License Plate is produced as seen on Dean Winchester’s '67 Chevrolet Impala in the first season of the series Supernatural.

• Standard USA plate dimensions (12" x 6")
• Screen accurate plate / exact replica
• Metal stamped / embossed aluminum
• Shrink-wrapped

Expand your Pop! style with Pop! Pins! This large Pop! Pin measures approximately 4-inches tall, just like the Pop! Vinyl Figure it's based on. Not only does the pin have the standard pin backings so you can attach it to bags or a cork board; it also has a "Funko Crown" pin stand allowing it to stand up for a dynamic display! True to it's namesake, the head is raised making it pop from the body. This Universal Monsters Frankenstein Large Enamel Pop! Pin comes packaged in a window display box.

• Officially Licensed
• 4" Tall
• Crown Stand

Based on everyone's favorite classic Beetlejuice, this beautiful full color 1.5" set wide soft enamel pin, comes with a double rubber clutch backing and is perfect to put on a shirt, jacket or backpack.

• Officially Licensed 
• Approx. 1.5" each
• By Cakeworthy

Don't take life too seriously, no one makes it out alive!

Statement coffin-shaped too dead to die lapel pin, in white and contrasting black enamel. The ideal way to add some creepy vibes to yer fav looks!

• Enamel & Metal Pin
• Secure Closure Back
• Size 1.5" x 1.1"

The perfect horror patch for the make-up loving, special effects bad ass in your life. It's the perfect blend of beauty, fashion and horror all in one iron-on patch from Kreepsville.

• Size Approx: 4.75" 

This highly detailed Krampus movie pin is full color 2" tall soft enamel pin, comes with a double rubber clutch backing and is perfect to put on a shirt, jacket or backpack.

• Officially Licensed 
• Collectible Pin Back Card 

© Legendary

Show your pride with this officially licensed Elvira pin. Featuring rainbow glitter Elvira aka the Mistress of the Dark face enamel design with an epoxy finish. 

• Officially Licensed 
• 2" h x 1" W
• Artwork by Count Porl Mchale.

© Queen "B" Productions

A classic icon of Halloween... the headless horseman is now an iron-on patch for your jacket or bag!

• Size Approx: 4.25" W x 5" T
• Iron-On Patch

This amazing Silver Shamrock Pumpkin pin from the classic Halloween III: Season of the Witch full color 2" wide soft enamel pin comes with a double rubber clutch backing and is perfect to put on a shirt, jacket or backpack.

• Officially Licensed 
• Collectible Pin Back Card 

Halloween III is a trademark and copyright of Universal Studios. Licensed by Universal Studios Licensing LLC. All rights reserved.

This beautiful Gremlins Gizmo full color 1.5" wide soft enamel pin, comes with a double rubber clutch backing and is perfect to put on a shirt, jacket or backpack.

• Officially Licensed 
• Collectible Pin Back Card 

GREMLINS and all related characters and elements © & TM Warner Bros. Entertainment Inc.

This isn't your ordinary everyday magnet! The Child's Play Chucky in Packaging Funky Chunky Magnet is made from wood and laser die-cut. A perfect addition to fridges, desks, lockers, and more!

• Officially Licensed
• Made of wood. Flat design.
• Laser die-cut design
• Roughly 4"

What better Classic Monster product than your very own Frankenstein Enamel Pin!

This beautiful full color 1.75" tall soft enamel pin, comes with double back clutches and is perfect to put on a shirt, jacket or backpack.

• Officially Licensed 
• Collectible Pin Back Card 

The Universal Monsters are trademarks and copyrights of Universal Studios. Licensed by Universal Studios. All Rights Reserved.

Boys and their toys! This isn't your run-of-the-mill magnet. It's wooden, it's laser die cut, and it's so chunky! Measuring about 4-inches tall x 3-inches wide, the Texas Chainsaw Massacre BW Funky Chunky Magnet is a fun way to fill up that empty spot on your fridge… if there is one!

• Officially Licensed
• Made of wood. Flat design.
• Laser die-cut design
• Roughly 4"

Showing the likeness of the titular character from the film, Annabelle is possessed by a demon and is looking to collect the souls of humans around it! Keep the lights on and the doors locked, this is one doll who means business! Grab one today......if you dare!

Do you have what it takes to take a sip!? We're sure you do! 

• Officially Licensed 
• Top-shelf Dishwasher and Microwave Safe
• 18oz Mug
• 7" Tall

NOTE: These mugs are handmade, making each one unique, so slight variations from images shown may occur.

Add some horror to your refrigerator or any metal surface with this Halloween Michael Myers 3D Foam Magnet.

• Officially Licensed
• Hard Poly Foam Magnet
• Roughly 4"

Halloween II is a trademark and copyright of Universal Studios. Licensed by Universal Studios LLC. All rights reserved.

A nightmare on your refrigerator! This isn't your run-of-the-mill magnet. It's wooden, it's laser die cut, and it's so chunky! Measuring about 4-inches tall x 3-inches wide, the Nightmare on Elm Street Freddy Funky Chunky Magnet is a fun way to fill up that empty spot on your fridge… if there is one!

• Officially Licensed
• Made of wood. Flat design.
• Laser die-cut design
• Roughly 4"